| I/O Boards |
TF00251 - Board for 8 analog inputs for Remote Control and Radio products
- This module provides 8 analog inputs designed to measure voltages up to 50 V.
- It is possible to select the measurement range for a better accuracy while converting.
|
 |
ST00741– Board for 16 status (digital) inputs
This module provides 16 digital inputs and can work in 2 different modes (internal or external power supply mode) depending on jumper configuration.
|
 inputs copie.png) |
ST00741– Board for 8 digital Relay
This module provides 8 relays. Each relay has one com input (common) and two outputs: NC (normally closed) and NO (normally opened). |
 |
| Communication |
SY00327 – External PSTN Modem
This modem combines convenient telephone messaging features with advanced V.92 Internet technology to get you the best possible performance from your dial-up connection.
V.PCM Upstream gives you upload speeds up to 50% faster – perfect for sending e-mail messages.
Technical specifications:
- V.92 56K ITU standard
- V.90 56K ITU standard
- V.34 33.6K ITU standard
- Compatible with ITU and Bell standards from
- 56K down to 1200 bps
- V.80 video conferencing support
- V.42/MNP2 – 4 error control
- V.42bis/MNP5 data compression
- Faxing: Class 1 and 2.0 Group II
Other version:
SP00649 – Kit external PSTN modem + reset capability
package content:
- SY00327 – External PSTN modem
- Specific power supply connector allowing hard reset from the GOLDENEAGLE FM
|
 |
TF00145 – External GSM/GPRS Modem
This ultra compact Dual-Band Terminal has all the right industrial interfaces for GPRS class 8 data, voice, SMS and fax applications.
It can be powered by a wide range of voltages. A built-in SIM card reader makes it easy to plug theTerminal into your applications.
Technical specifications
- Dual-Band EGSM900 and GSM1800
- Compliant to GSM phase 2/2+
- Output power:
- Class 4 (2 W) for EGSM900
- Class 1 (1 W) for GSM1800
- Control via AT commands
- SIM Application Toolkit
- Multiplex RS232 interface
- Power save mode
- Supply voltage range 8...30 V
- Dimensions: 65 x 74 x 33 mm
- Weight: 130 g
- Ambient temperature: –20 °C ... +55 °C
Specifications for data transfer
- GPRS class 8 (up to 85.6 kbps)
- Full PBCCH support
- GPRS mobile station, class B
- CSD up to 14.4 kbps
- USSD
- Non transparent mode
- V.110
- Coding scheme CS1, 2, 3, 4
Specifications for fax
Interfaces:
- Plug-in power supply
- Handset audio interface
- Mini-SIM card reader
- Antenna connector FME (male)
- V.24/V.28 interface on the 9-terminal sub-D socket
- Operating status LED
Approvals:
- R&TTE, GCF, CE
- Local approvals and network operator certifications
|
 |
SY00507 – Router with PSTN connection (sub-config)
Designed especially for Audemat, this router is able to provide:
- A PSTN connection between several units in a LAN and a remote site.
- A PSTN call to a specific phone number depending on the IP address to join.
Technical specifications
- LAN: Ethernet 10/100 Mbit/s four port switch hub with auto Mdi / Mdx
- Serial: 25 Pin RS-232 Async – Sync up to 400 kbit/s
- Case: Material Powder coated pressed steel
- Temperature: –20˚C to +55˚C operating
- Power: 10 – 28 VDC 10 W
- Size: 240 mm x 150 mm x 35 mm
- Protocols: TCP/IP • PPP • X.25 • XOT • FTP • SYNC TUNNELLING • SNMP • GRE • TELNET, VRRP & VRRP2, IGMP, RIP, OSPF, BGP
- Security: IPSec (20 Tunnels Included) SSL • SSH DES • 3DES • AES Pre shared Key and Certificate authentication
- Management: Web server & command line interface, remote & local access, SNMP
- Network: Features Dynamic DNS & VPN tunnelling to enable use with dynamic network
|
 |
SY00145 – PSTN USB modem
This USB modem provides 300 bps to 56K bps data rates, 14.4K bps fax, voice functions, and a hot-swappable USB interface. It meets RoHS compliance directives, and conforms to all standards required for immediate shipping to US, Canada, Europe and other major industrial countries around the globe. |
 |
TF00165A0 – Phone Alert Interface for Audemat products
Available with the new versions of the Audemat equipment, this option allows to get status and to activate controls via ordinary phone line using the PSTN USB modem (SY00145) and ScriptEasy software suite. Voice messages are wave files and can be customized.
Technical specifications
- USB 2.0 compatible
- AT Command set
- RJ-11 phone jack built in
- Size: 1.4” (w) x 2.5” (D) x 1.0” (H) - w/ Enclosure
- 300 bps to 56K bps data rate / Upstr. 48K bps, downstr. 56K bps / 14.4 kbps Fax – Class 1
- Voice function / Generates and detects DTMF tones in voice mode
- V.44 data compression and V.42bis and MNP-5 data compression
- LED power indication
- Caller ID type I and II for select countries (local subscription required)
- Operating temperature: 0°-50°C (min-max)
- Relative Humidity (non-condensing) : 15-90% (min-max)
- Low power consumption: On-Hook / Off-Hook: 83/94mA
Agency approvals
- Transferable FCC68, CS03 and CTR21 certifications
- IEC/EN60950-1, EN55022B, EN55024 compliance
- EN60601-1 (Medical Electronics) compliant
- FCC15B, CE Marking
|
|
CF00041 – PSTN line protector
Technical specifications
- Arrester rated voltage UC : 185 V DC / 130 V AC
- Nominal current IN ≤ 380mA (25°C)
- Operating effective current IC ≤ 6 μA
- Nominal discharge surge current In (8/20)μs core-core/core-earth ≤ 5kA
- Measured limiting voltage at 1 kV/μs core-core/core-earth ≤ 250V
- Input attenuation aE in a 100 Ω-system: typ. 0.5 dB (≤ 5 MHz)
- Temperature range: -40°C ... +85°C
- Degree of protection acc. to IEC 60529/EN 60529: IP20
|
 |
| Environment |
SY00056 – WebCam
This webcam gives great pictures and you can adjust the focus manually to get the best possible picture.
The installation on the Audemat devices is « plug & play », you just have to connect it to a USB port and it is automatically recognized by the system and ready to use.
It allows you to take snapshots on motion detection or with the photo button using the Audemat ScriptEasy software.
Complies with the following directives/standards:
- EMC Directive (2004/108/EC)
- EN 55022 (2006)
- EN 55024 (1998 +A1:2001 +A2:2003)
|
 |
SYS00398 – Temperature & Hygrometry probe
This temperature and humidity probe features good measurement performance in a small, rugged and simple probe.
Technical specifications
- Length: 71mm
- Diameter: 12mm
- Wire length : 3m
- Cable connector 4-pin M8 (IEC 60947-5-2)
- Weight 25 g
- Power Supply: 7 to 28VDC
- (not included alternatively unit can be powered from pin 13 of relay board)
- Current consumption 2 mA typical
- Temperature range : -40°C to 60°C (-40°F 140°F)
- Temperature output: 0 to 5VDC
- Humidity Range: 0 to 98%RH
- Humidity output: 0 to 5VDC
- Protection type IP65
Typical performances:
- Hygrometry: +/- 3 %RH in the range 0-90 %RH
+/- 5 %RH in the range 90-98 %RH
- Temperature: +/- 0,6°C (+/- 1,1°F)
|
 |
SY00441 - Thermostat
Thermostat contact maker for regulating of filter fans and heat.
Exchangers or for switching signal devised when temperature limit has been exceeded for example.
Technical specifications
- Adjustment: 0 to 60°C
- Output: Closure contact
- Switch temperature difference 7K (± 4K tolerance)
- Sensor element thermostatic bimetal
- Contact type snap-action contact
- Contact resistance < 10mOhm
- Service life > 100,000 cycles
- Connection 2-pole terminal for 2.5mm², clamping torque 0.8Nm
- Dimensions 60 x 33 x 43mm
- Weight approx. 40g
- Fitting position variable
- Mounting clip for 35mm DIN rail, EN50022
- Casing plastic according to UL94 V-0, light grey
- Protection type IP20
|
 |
SY00442 - Hygrostat
The electromechanical hygrostat is designed to control enclosure heaters so that the dew point is raised when a critical relative humidity of 65% is exceeded. In this way condensation and corrosion is effectively prevented.
Technical specifications
- Adjustment: 35 - 95% RH (+/- 3.0%) relative humidity
- Operating 0 to +60°C (+32 to +140°F)
- Switch difference 4% RH (± 3% tolerance)
- Permissible air velocity 15m/sec
- Output contact type: Normally opened or Normally closed
- Contact resistance < 10mΩ
- Service life > 100,000 cycles
- Connection 3-pole terminal for 2.5mm²,
- Dimensions 67 x 50 x 38mm
- Weight approx. 60g
- Fitting position variable
- Mounting clip for 35mm DIN rail, EN50022
- Casing plastic according to UL94 V-0, light grey
- Protection type IP20
|
 |
SY00440 – Voltage Pick-Up
This voltage pick up can be used to monitor the main voltage supply and/or to monitor the power consumption by using it with the current probe (Ref: SY00450).
Technical specifications:
- Input Voltage: 0-230VAC
- Output Voltage: 0-12V
- Frequency range: 50/60Hz
- Dimensions: 94*63*71mm. Weight: ~0.51Kg
- Short circuit proof
- Protection type IP00
- Operating temperature: 40°C
- Fixing system on rail DIN EN50022
|
 |
AL0052 – Voltage Pick-Up
This voltage pick up has been created and developed to fit all applications in automatism, industry and electronic. This product of solid construction, easy to use complies with all standards in force.
Technical specifications:
- Transformer according to EN 61558 standard
- Input: 230 VAC 50/60 Hz +/- 10 % Class A, insulation voltage 1,5 KV
- Output: 0-35 VDC
- Input protection: fuse 0,5 AT
- Output protection: fuse 1 AT
- Dimensions: LxWxH 115x80x80mm
- Weight: 1 kg
- Packing: 120 x 100 x 90 mm
- Fixing system on rail DIN. option casing mounted
|
 |
SY00450 - Current pick up
Split core transducer for the electronic measurement distorted AC waveforms current, with galvanic isolation between the primary (high power) and the secondary (electronic circuit). Switch selectable ranges and true RMS 0-5V and 0-10V switch selectable voltage output.
Technical specifications:
- Rail Din compatible
- Input voltage 24VDC +-5%
- Incurrent measured: 0 to 50A
- Output : 0 à 5V/0 à 10V
|
 |
SY00448 – Door closure contact
This door contact allows controlling the opening and closing of any door. Indeed, it’s compatible with metal door. So, you can monitor the entrance of your transmitter site or of the cabinet.
Technical specifications
- Compatible with metal door
- Current max: 20mA
- Gap operation: 20mm
- Dimensions: 58x20x15mm
|
 |
SY00444 – Lightened Tricolor Column
Technical specifications
- Wire length: 2m
- Power supply: 24 VDC
- Starting current: max 500mA
- Current: 40 mA per light
- Colour: Red/ G reen/ Yellow
- Height: 147mm
- Diameter: 36mm
- Life duration: max 50,000 h
- Temperature range: -20°C to +50°C
- Protection rating: IP65
|
|
SY00446 – Fixing kit for Lightened Tricolor Column
SY00447 – Tube foot for Lightened Tricolor Column
|
 |
SY00006 - BNC Fixed Attenuator 20dB
|
|
RL00025 – Modular Monostable Relay 20A
- Double phase switch 2 NO
- 35 mm rail (EN 50022)
Contact specifications
- Contact configuration: 2 NO
- Rated current/Max. peak current: 20/30A
- Rated voltage/Max. switching voltage : 250V/400AC
- Standard contact material: AgNi
Technical data
- Mechanical life cycles: 500...103
- Electrical life at rated load in AC1 cycles: 50...103
- Maximum impulse duration: continuous
- Ambient temperature range: –40°C …+40°C
- Protection category: IP 20
|
 |
SY00443 – Power supply 12V
SY00445 – Power supply 24V
The Convert Simply front-end converters represent a family of 15, 30, and 50 watt DIN-rail mountable AC-DC converters for use as rectifiers or battery chargers. Plastic casing, compact size, and high reliability make the LOS, LOR, LOK4000 Series an excellent choice for space-critical applications, where a DIN-Rail mountable AC-DC converter is required. The universal input range and a built-in input filter allow flexible operation in a wide variety of electronic equipment and enables worldwide connection to the mains.
Technical specifications
- Operating Voltage: 85 to 264 VAC 47 to 63 Hz / 90 to 250 VDC
- Voltage Output: 24V or 12V depending on the version
- Current Output: max 1.25A for 12V version / 650mA for 24V version
- Safety according to IEC/EN 60950, UL 1950, and UL 508 2 + EN 61204: 1995
- RoHS lead-solder-exempt compatible
- Extremely compact design
- Operating ambient temperature range –10 to 50 °C with convection cooling
|
 |
SP01210 – Power supply for Mini Control SILVER – EU version
SP01210-A0 – Power supply for Mini Control SILVER – US version
Delivered in option with the Mini Control SILVER. (power cord depending on version)
Features
Universal AC input / Full range – Nominal power: 18W
2 pole AC inlet IEC320-C8, Class II power (without earth pin)
Input power: 90-264VAC
Output power: 12VDC
Protections: Short circuit / Overload / Over voltage
Fully enclosed plastic case, dimensions: 33 x 54 x 79mm, weight: 220g
RCC control circuit and regulated
LED indicator for power ON
Temperature operation: 0-50°C
MTBF: 500 000 hrs
Delivered in option with the Mini Control SILVER. (power cord depending on version) |
 |
Cabling & connectors
|
SY00359 – DB25 – Male connector
SY00361 – DB25 – Female connector
Connectors with Shielded Backshell
Ideal for prototyping, retrofitting, R & D etc.
Quick termination using a flat blade screwdriver
Shielded backshells accept 4-10mm cable
Integral cable clamp, left/right 45° entry
Contact numbers clearly identified
Plugs & Sockets include knurled fixing screws
Technical specifications
- Voltage rating: 60Vac/dc (max.)
- Current rating: 1A (max.)
- Wire acceptance - stranded (solid): 0.14 - 1.0mm² (0.14 - 1.5mm²)
- Housing material: metal plated ABS UL 94-VØ rating
- Insertion/withdrawal cycles: >50
- Temperature range: -20°C to +75°C
- Cable diameter: 4 - 10 mm
|
 |
SY00313 – Sub-D 25 F with screw termination
SY00314 – Sub-D 25 M with screw termination
This SubD25 with screw termination is especially designed for field applications and permits easy wiring without any specific tool; only a standard electrician’s screwdriver is required.
Due to their reduced overall dimensions, this connector is compatible with all standard hoods and accessories.
Technical specifications:
- Shells: Steel Tin plated
- Insulator: Glass filled thermoplastic, UL94V-0
- Contacts: Machined brass, full gold
- Current Rating: 7,5 A max.
- Voltage Rating: 300 V RMS at 50 Hz
- Withstanding Voltage: 1000 V RMS at 50 Hz
- Insulation Resistance: > 5000 at 500 V DC
- Contact Resistance: < 5
- Operating Temperature: -67°F (-55°C) to +185°F (85°C),
- peak at 257°F (125°C)
- Damp Heat: 21 days 219°F(104°C - 95% HR)
- Salt Spray: 48 hours
- Cable Type: Solid or stranded
- Cable Gauge: 0,75 mm2 max. (AWG 18)
- Screw Torque: 0,05 mN max.
- Mating Cycles: 100 (class II)
|
 |
TF00159 – INFRAPlus wiring patch panel with insertion tool
TF00168 – INFRAPlus wiring patch panel without insertion tool
TF00160 – INFRAPlus 16 Digital inputs kit (cable + 2 wiring modules)
TF00161 – INFRAPlus 8 Relay outputs kit (cable + 2 wiring modules)
TF00162 – INFRAPlus 8 Analog kit (cable + 1 wiring module)
Used to facilitate connection of I/O boards (SUB 25 connectors)with existing wiring of devices.
The system is flexible because its components are modular: panel occupation on a 19” support is built up from interchangeable basic modules that enable a multitude of combinations.
|
|
SPE00469 – Connection kit UM 45-D25SUB – male
SPE00470 – Connection kit UM 45-D25SUB - FEMale
VARIOFACE module, with screw connection and D-subminiature pin strip, for assembly on NS 35/7.5, 25 positions. Flat ribbon - 50cm Male<>Female.
Technical specifications
- Nominal voltage UN : 125 V
- Max. current carrying capacity per branch: 2.5 A
- Number of positions: 25
- Length: 45 mm
- Width: 90 mm
- Height: 42 mm
- Ambient temperature (operation): -20 °C ... 50 °C
- Test voltage input/output: 2.5 kV AC
- Standards/regulations: IEC 664/IEC 664 A/DIN VDE 0110; DIN VDE 0160 (in parts)
Connection data
- Connection: 1 PCB connection
- Connection in acc. with standard: IEC/ DIN VDE
- Type of connection: Screw connection
- Min. conductor cross section, rigid: 0.14 mm²
- Conductor cross section, rigid max.: 1.5 mm²
- Conductor cross section flexible min.: 0.14 mm²
- Max. conductor cross section, flexible: 1.5 mm²
- Min. conductor cross section AWG/kcmil: 26
- Conductor cross section AWG/kcmil max: 16
- Stripping length: 6 mm
- Screw thread: M 3
- Connection 2: D-SUB connection
- Type of connection : Pluggable
Certificates
- UL / CUL
- Comments : Field wiring
- Nominal voltage UN :125 V
- Nominal current IN : 2.5 A
|
 |
CA00191 – RS232/USB cable adaptor + driver
Features:
- Converts a USB port into a 9-pin male RS-232 serial port capable of speeds up to 230,400bps.
- The USB Serial Adapter is designed to make serial port expansion quick and simple.
Technical specifications:
- Installed as a standard COM ports, Full RS-232 modem control signals, RS-232 data signals; TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND
- USB cable included
- Powered by USB port
- Supports Windows 98/SE, ME & 2000, 2003, XP and Vista
- Prolific Chip Adapter
- The USB Serial Adapter provides instant connectivity with modems, ISDN TAs, PDS, handheld & pocket PCs, digital cameras, POS, serial printers, etc.
It is suitable for remote access, retail and industrial applications, data collection and other applications requiring a High speed and or LOW serial communications port
|
 |
SY00449 – RAIL DIN 500mm
This DIN rail is a standardized 35 mm wide metal rail with hat-shaped cross section.
It is widely used for mounting circuit breakers and industrial control equipment inside equipment racks |
|
