T2055 DVB Measurement Receiver

The T2055 is designed for measurement of DVB channels during operations of installation, maintenance and broadcast monitoring of digital terrestrial transmitters. It performs in real-time RF transmission quality measurements, MPEG2 stream analysis according to TR 101 290, MPEG2 services decoding and remotecontrolled alarms management through Ethernet TCP/IP interface.

Key Features :

Terrestrial input: COFDM front-end ETSI EN 300 744 compliant
      - Frequency tuneable in TV frequency bands III, IV-V 6, 7, 8 MHz
      - High level non selective input for accurate measurements
      - Medium and low level selective input for receiving measurements
      - 10 MHz and 1pps inputs for SFN mode

Satellite input (optional): QPSK front-end ETSI EN 300421 compliant
      - Frequency tuneable in TV frequency band 950- 2150 MHz

Demodulation parameters: automatic (TPS) or manual configuration

MPEG2-TS ASI input

MPEG2-TS provided on 2 ASI outputs at 270 Mbits/s bit rate,      according to EN 50083-9 standard

RF demodulation quality measurements (accurate RF level      measurements) and MPEG2-TS analysis according to TR 101 290

Internal MPEG-2 demultiplexer-decoder - PAL, SECAM, RGB, and audio      outputs

Access to configuration data measurements and analysis on front      panel

Full remote control through Ethernet 10BaseT TCP/IP interface for      services HTTP, FTP, SNMP…

Embedded Web Server

Full remote control through RS232 serial interface and synthesisis      alarms relays

The embedded software can be remotely downloaded

Alarm thresholds can be tuned for each measurement or analysis      parameter

Portable cabinet – 115/240VAC-50/60 Hz power supply

Order Designation :

T2055 1 : DVB Measurement Receiver